How To Repair Holes In Down Jackets

Are y'all sick of feathers leaking from your downwards jacket? Need to set up a burn hole in your puffy? We have a simple fix to rips, tears, and holes in downward or nylon jackets, ski pants and snow gloves. From GORE-TEX® rainwear to The Northward Face up® parka, hands patch your favorite waterproof garments without dampening its look or style. All you need is some clear or black nylon repair record or gear patches.

WASH & Dry

Before making a patch repair, clean down and nylon gear showtime. Using our Revivex formulas, hardworking ski jackets, pants, and rainwear stay fresh and will continue to protect u.s. from the elements. Read our blog to acquire how to wash GORE-TEX fabrics or find out how to launder down jackets so they go along performing at their best.

PEEL-AND-STICK PATCH REPAIR

• Tenacious Tape Mini Patches or Tenacious Record Gear Patches
• Isopropyl Alcohol

Estimated Fourth dimension: 5 minutes

1. Clean the repair area with isopropyl alcohol to remove any dirt or body oils that may forbid a good bond. Trim any loose threads or feathers.
2. Peel off the backing on a Tenacious Record Mini Patch or Gear Patch and apply information technology over the rip, tear, or hole. Patch should overlap tear by 0.five" (12 mm) in all directions.
3. Apply pressure from the center out. Smooth out any bubbling and ensure the edges lay flat.

If y'all practise a repair before cleaning the gear, look at to the lowest degree 24 hours for the Tenacious Tape patch to adhere properly before washing it.

PRO TIP: Make your repair almost invisible past using clear, black, ruddy or xanthous Tenacious Record to match the cloth. If you're patching a hardshell jacket, put the patch on the within.

IRON-ON PATCH REPAIR

• Tenacious Tape GORE-TEX Fabric Patches
• Iron, Hair Dryer, or Machine Dryer

Estimated Fourth dimension: 15 minutes

When actress force is required specially for high-wear areas (east.g., cuffs and knees), apply heat on the Tenacious Tape Mini or Gear Patch afterwards awarding on the outerwear. For repairs on waterproof-breathable fabric that get more wet and scrapes, apply Tenacious Tape GORE-TEX Textile Patches with oestrus.

1. Clean and dry area to be repaired.
2. Peel off GORE-TEX Cloth Patch backing and apply to damaged expanse.
3. Apply pressure from center out to remove air bubbles.
4. Ready the iron to medium or permanent-printing oestrus. Use moderate pressure and circular movement for 30 seconds to rut evenly.
5. (Optional) Instead of an iron, use a hair dryer or tumble the garment in a machine dryer for 30 minutes on regular setting to strengthen the repair patch.

PRO TIP: Cutting Tenacious Tape to size past rounding out the edges to forestall the patch from snagging or peeling off before it fully bonds to the fabric.

Keeping downward puffy coats, nylon jackets, and GORE-TEX gear in tip-top shape is simple with Tenacious Tape repair patches and Revivex cleaners.

Source: https://www.gearaid.com/blogs/learn/down-jacket-repair-how-to

Posted by: reedalind1967.blogspot.com

Share this post