banner



How To Remove Silk Screen From Fabric

Download Article

Download Article

There are a few reasons y'all might want to remove printed designs or lettering from an item of clothing. Maybe you love the piece of wear, simply don't like the press. Perhaps the press is getting old and doesn't expect good anymore, and then you just desire to get rid of it, or replace it with something else. Either way, with the help of an iron or a household solvent, yous will be able to remove common kinds of prints such as vinyl or prophylactic.

  1. i

    Put the item of habiliment on a apartment surface to iron it. Identify the wearable on a surface that is safe to atomic number 26 on. An ironing board or hard table of some kind is best.[1]

    • You could use the floor if yous don't have any other surface to atomic number 26 on. But exist careful with a hot iron around carpet.
    • This method works to remove vinyl or safety prints that were estrus transferred to the clothing in the first identify.
  2. ii

    Place a dry towel within the clothing underneath the press. Fold a towel up so it fits inside of the piece of wear and below all of the printing that you desire to remove. This will protect the other side of the wearable from the estrus of the fe.[two]

    • If you lot don't have a spare towel handy, yous could also apply an old t-shirt or annihilation else that is soft and not prone to harm by heat.

    Advertising

  3. 3

    Put a wet cloth on top of the printing. Soak a hand towel or clean material in cold running water. Wring out the excess water so it is not dripping and place the fabric apartment over the impress you want to remove.[3]

    • The moisture textile will create a protective layer betwixt the iron and the printing so it doesn't melt onto the iron.
  4. 4

    Place a hot iron on top of the moisture cloth over the printing. Printing the hot iron confronting the wet fabric over the commencement part of the print that you lot want to remove. Use gentle pressure with your hand to be sure the heat reaches the print.[4]

    • If the iron is the heavy old-fashioned kind, then you tin can just let information technology sit on summit of the printing and the weight should be enough on its own.
  5. five

    Remove the iron when the wet cloth is dry below the atomic number 26. Heed to the audio of the water fizzing and evaporating on the wet fabric under the iron. The textile will be dry when you don't hear the water bubbling anymore. Lift the iron up and set up it aside when that part of the cloth is dry.[five]

    • If you leave the iron on besides long after the wet fabric stops fizzing, it could burn.
  6. 6

    Use a knife to loosen the press and pry it off. Carefully scrape off the print with the sharp edge of a knife. Apply your fingers to assist peel it off when y'all accept loosened it with the knife.[six]

    • Be conscientious to always scrape abroad from you with the knife to avoid cut yourself.
    • Try to utilize the knife to only loosen the edges of the printing, and so peel as much every bit you tin can off with your fingers to avoid damaging the material below with the knife.
  7. 7

    Repeat the procedure until all the printing is gone. Wet the material once again if it is dry out later you skin off the get-go section of print. Employ the hot atomic number 26 over the moisture cloth for the remaining printing, then scrape and peel it off until you are happy with the results.[7]

    • You may have to go over sections several times, depending how stuck on the printing is.
  8. Ad

  1. one

    Get a solvent like rubbing alcohol, blast polish remover, or adhesive remover. These are common solvents y'all will exist able to find in your house or at a convenience store. Go a bottle that has enough liquid in it to soak the whole area of the clothing that you want to remove printing from.

    • Y'all tin can as well look for special heat transfer vinyl remover that is designed to take vinyl lettering off of wear.
    • Solvents only work to remove vinyl and rubber prints from clothing. Screen printed ink is permanent on clothes.
  2. 2

    Test the solvent on a hidden area of your article of clothing to see if it causes damage. Turn the habiliment inside out or find an expanse that doesn't show when you habiliment it. Pour a driblet or 2 of the solvent you are going to use onto the hidden area, and wait to see if it discolors or damages the fabric in whatsoever way.

    • If the wearable looks fine subsequently you pour the solvent on, and then it is safe to proceed. If not, then you should find another solvent to utilize so you lot don't ruin your clothing.
    • Don't utilise solvents on delicate fabrics such equally rayon, wool, or silk.
  3. 3

    Turn the wearable within out and then the backside of the printing is facing yous. You want to be able to soak the fabric behind the printing in society to take it off the front. Place the within-out item of clothing on a flat surface in front of you.[8]

    • It would probably be easiest to sit or stand up at a table or counter as you remove the press.
  4. 4

    Pour the solvent onto the part of the vesture where the printing is. Pour out enough solvent to soak the entire back part of the fabric behind the print you desire to remove. Wear a facemask if the solvent fumes carp y'all.[9]

    • Make sure that y'all are working over a surface that will exist easy to clean upward if you accidentally spill any solvent.
    • Stretching the fabric out and so that the solvent can soak in completely tin can brand the process easier. Merely make sure non to stretch the clothing so much that yous damage or distort it.
  5. 5

    Plough the clothing back correct side out and pare or scrape off the printing. Flip the clothing dorsum so that the press is facing outwards. Try to peel off the impress with your fingers or scrape information technology off with the abrupt edge of a knife.[10]

    • Be conscientious when yous employ a knife and ever scrape away from y'all.
    • You tin article of clothing latex gloves if you don't want to get the solvent on your fingers and easily.
  6. half-dozen

    Echo the process until you accept peeled off all the press. Get as much print off as y'all can past peeling and scraping. Flip the habiliment inside out over again and pour on more solvent when you can't get anymore off, and then try to peel and scrape the remaining print off again until it is all gone.[xi]

    • If yous can't get it all off with a solvent, and so y'all tin can endeavour using the heat from an fe to loosen the printing.
  7. 7

    Launder the clothing as you unremarkably would to remove the solvent. Follow the garment'south care instructions to launder it safely. This will become rid of any harsh chemical smells and your clothing will be ready to wear again![12]

    • If there is any glue residuum or stickiness left where the impress used to exist later on yous wash the wear, then endeavor an adhesive remover to go the residuum off.
  8. Advertisement

Ask a Question

200 characters left

Include your e-mail address to become a message when this question is answered.

Submit

Advertisement

Video

Cheers for submitting a tip for review!

Near This Article

Commodity Summary X

To remove the print from your item of clothing, commencement past placing it on an ironing board. Then, fold a dry towel within the clothing so information technology's directly underneath the print you want to remove. Yous should likewise place a wet material or hand towel on top of the print to stop it melting onto the iron. In one case your iron has heated up, press information technology gently against the wet fabric and hold information technology in that location until the water stops bubbling or fizzing. When the cloth has stale out, carefully scrape off the print with the sharp edge of a knife. If you can't remove the whole print the first time round, wet your textile again and repeat the process until the print is all gone. Alternatively, apply a solvent, like rubbing alcohol, nail smoothen remover, or adhesive remover, to the dorsum side of your print before scraping it off with a knife. For more tips, including how to test a solvent on your article of clothing to make sure it doesn't cause damage, read on!

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 594,555 times.

Did this article help you?

Source: https://www.wikihow.com/Remove-Prints-from-Clothes

0 Response to "How To Remove Silk Screen From Fabric"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel